- Reinforced leading edge provides protection where the deck needs it most.
- Multi-layer heavy-gauge steel construction for maximum strength.
- Debris shield on idler pulleys keeps moisture and debris away, extending bearing life.
- Center point is offset, optimizing airflow for discharge.
- Slope nose design allows grass to rise in the chamber before making contact with the blades, resulting in a better cut quality.
- Deck step allows for easy entry and exit from the operator’s compartment.
- Strong, 6 mm thick Marbain® steel blades.
- Removable rear baffle inserts*.
- Ferris® mulching blades fitted as standard on all RD and TRIPLE decks.
* A factory fitted half-height rear baffle insert and mulching blades combine rear discharge with mulching characteristics. An optional full-height rear baffle insert is used for full-featured mulching.
Spindles
Hercules™ II Spindles
Cast-iron spindle housing featuring a 257mm 6-bolt large flange diameter, 30,16 mm shaft, 62 mm industrial - double row - angular contact ball bearings, commercial grade double lip seals, metal debris shields on top and bottom and the ability to grease through the top of the spindle.
Cast-Iron Spindles
Cast-iron spindle housing featuring a 201 mm 6-bolt large flange diameter, 25,4 mm shaft, 62 mm single row deep groove ball bearings, integral bearing seals, metal debris shields on top and bottom, ability to grease through the top of the spindle and a pressure relieve valve.
Aluminium Spindles
Cast aluminium spindle housing featuring a 133 mm 4-bolt large flange diameter, 25,4 mm shaft, 62 mm single row deep groove roller bearings, integral bearing seals, metal debris shields on top and bottom, ability to grease through the top of the spindle and a pressure relieve valve.
Aluminium Spindles
Cast aluminium spindle housing featuring a 135 mm 6-bolt large flange diameter, 20 mm shaft, 47 mm - double row - angular contact ball bearings, integral bearing seals, metal debris shields on top and bottom, greaseable through side of spindle housing.
